Table of Contents
Advertisement
Use the steps in the following procedure to configure SIP DECT for using Central directory
access.
Configuring IP DECT
1. Open the IP DECT Configurator and click Modify.
2. Select the SIP DECT system that you are running. Click IP Settings.
3. Click More.
4. Enter the CDA IP Address and the CDA port.
5. Click Apply.
6. Click Save System.
7. Click Activate / Deactivate / System Status.
8. Restart the DDS service and restart all DAPs.
SIP DECT Fundamentals
The IP Settings page appears.
TheAdvanced IP Settings pane appears.
The IP address is the IP address of the computer running the Central directory
access tool. The port number is the port that is open for Central directory access
on the CDA computer. The default port number is 30160.
Central Directory access tool
October 2012
145
Advertisement
Table of Contents
