G.729 daughterboard and DAP wall mounting
Mounting the 4720 DAP on a wall
Use this procedure to mount the 4720 DAP to the wall:
1. Remove the mounting plate from the 4720 DAP cabinet.
2. Attach the mounting plate to the wall.
3. Ensure the Cat 5 cable to the cabinet is the correct length.
4. If necessary, mount the RJ45 connector to the cable using the tool for mounting an
5. Lead the Cat 5 cable to the 4720 DAP cabinet and connect the RJ45 connector.
180
SIP DECT Fundamentals
Figure 47: How to take the mounting plate off
Figure 48: Mounting plate
RJ45 connector plug to a Category 5 cable. For more information about standard
color schemes, see
Wire color coding for Category 5 cables
Push the cable into the groove.
Comments? infodev@avaya.com
on page 27.
October 2012