Avaya CS 1000 Fundamentals page 64

Site planning and hardware deployment
2. Count the number of user offices in each cell area.
3. Record the number of user offices on the floor plan in each cell area.
Creating an estimate table
Use the following table to estimate the number of handset users for each cell.
Table 5: Estimate users in a cell
Estimate for:
Users inside the cell with
an office
Users with an office
outside of a cell who walk
into the cell
Users without an office
Users in a cell
Creating an estimate table
1. Make an estimate table.
2. Label the rows as shown in
3. Label each column heading with the cell center indicator.
Calculating the number of users inside the cell with an office
Table 6: Example of the table first row calculation
Estimate for:
Users inside the cell with
an office
Users with an office
outside of a cell who walk
into the cell
Users without an office
Users in a cell
64 SIP DECT Fundamentals
Mark the cell areas on the floor plan, one area for each cell, and split cell overlap
areas in half, as shown in
recording offices on page 63 as heavy dotted lines.
1C1
Include a column for each cell center.
Use this table to determine how many times to subdivide each cell to carry the
handset telephone traffic.
1C1
8.4
Comments? infodev@avaya.com
Figure 33: Example of dividing the coverage area and
1C2
Table 5: Estimate users in a cell
1C2 1C3 1C4
1C3 1Cn
on page 64.
1C5 1C6 1C7
October 2012