Table of Contents
Advertisement
Site planning and hardware deployment
Figure 22: Example of new critical points (P8 and P9)
Use the following procedure to mark and label new critical points.
Marking and labeling new critical points
Mark and label these new critical points on the floor plan with the following symbol.
For more information, see
page 51.
Use the following procedure to mark new cell contours and a new cell boundary.
Demarcating new cell contours, a new center and a new cell boundary
Using the critical points from
contours, a new cell center and a new cell boundary.
For more information, see
from the center of the full coverage area
boundary
52
SIP DECT Fundamentals
Marking and labeling the cell boundary on the floor plan
Identifying new critical points
Demarcating the cell contour for the critical point farthest
on page 50.
Comments? infodev@avaya.com
on page 51, mark new cell
on page 47 to
Demarcating a cell
on
October 2012
Advertisement
Table of Contents
