Table of Contents
Advertisement
3. If you are exporting multi-site subscriptions, select Multi-site subscriptions.
4. Enter the PARI of the remote system.
5. If you are exporting multi-site subscriptions, enter the SARI of the remote system.
6. Click OK.
7. Click Add Number Range.
8. In the From field, enter the first number in the range of DNs to which you want to
9. In the To field, enter the last number in the range.
10. Click OK.
11. Select the required available extension number from the list on the Subscription
12. Click Enable
SIP DECT Fundamentals
The Add Number Range page appears.
export subscription data.
If you are exporting data for one DN only, proceed to step 16.
page; for example,, select 5001.
If the number you require does not show, select another page. The page number
appears in the top and bottom rows of the subscriptions table.
OR
Click Enable for multi-site, if you are exporting multi-site subscriptions.
The status of the configuring subscription record changes from Free to Enabled and
the Personal Identification Number (PIN) appears. The DAP manager generates a
PIN when it performs each subscribe operation; the PIN appears only when the
subscription status is Enabled.
Subscription export and import
October 2012
135
Advertisement
Table of Contents
