2. Installation
• The trailing edges of excessively curled or Z-folded paper can activate the tray full sensors before
the tray is actually full.
• Once the "Exit Tray Full" message displays, the job cannot continue until some sheets are removed
from the tray which is only partially full. The trays are designed to prevent this problem.
Shift Auxiliary Tray
Install the shift auxiliary tray [A] ONLY when the "Multi-Folding Unit FD4000 (D615)" is included
in the configuration. Note that the Shift Auxiliary Tray [A] may generate unexpected side effects,
for example, paper jams caused by displaced paper height detection feeler [B].
Proof Auxiliary Tray
Install the proof auxiliary tray [B] on the proof tray [A] when using the Z-fold function.
154