Quick Programming Mode - YASKAWA Varispeed E7 Instruction Manual And Parameter Description

Quick Programming Mode

In quick programming mode, the constants required for Inverter trial operation can be monitored and set.
Constants can be changed from the setting displays. Use the Increment, Decrement, and Shift/RESET keys to
change the frequency. The user constant will be written and the monitor display will be returned to when the
DATA/ENTER key is pressed after changing the setting.
Refer to Chapter 5 User Constants
Example Operations
Key operations in quick programming mode are shown in the following figure.
Mode Selection Display
Quick Programming Mode
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
for details on the constants displayed in quick programming mode.
Monitor Display
Reference selection
Operation method selection
Stopping method selection
C1-01: Acceleration time 1
C1-02: Deceleration time 1
C6-02: Carrier frequency
selection
AO CH1 output gain
AO CH2 output gain
Motor protection selection
Deceleration stall selection
Fig 3.5 Operations in Quick Programming Mode
Setting Display
d1-01: Frequency reference 1 E1-01: Input voltage setting
E1-03: V/f pattern selection
d1-02: Frequency reference 2
d1-03: Frequency reference 3 E1-04: Max. output frequency
E1-05: Max. voltage
d1-04: Frequency reference 4
d1-17: Jog frequency reference E1-06: Base frequency
E1-09: Min. output frequency
E2-01: Motor rated current
Modes
7
3-