YASKAWA Varispeed E7 Instruction Manual And Parameter Description page 118

MEMOBUS Communications: H5
Con-
Name
stant
Number
H5-01 Station address Sets the Inverter's node address.
Sets the baud rate for MEMOBUS
communications.
0: 1200 bps
Communications
H5-02 1: 2400 bps
speed selection
2: 4800 bps
3: 9600 bps
4: 19200 bps
Sets the parity for MEMOBUS
communications.
Communications
H5-03 0: No parity
parity selection
1: Even parity
2: Odd parity
Sets the stopping method for com-
munications errors.
0: Deceleration to stop using the
Stopping method
1: Coast to stop
H5-04 after communica-
2: Emergency stop using the
tions error
3: Continue operation
4: Continue operation with the fre-
Sets whether or not a communica-
Communications tions timeout is to be detected as a
H5-05 error detection communications error.
selection 0: Do not detect.
1: Detect
Sets the time from the Inverter
H5-06 Send wait time receiving data to when the Inverter
starts to send.
Enables or disables RTS control.
RTS control ON/ 0: Disabled (RTS is always ON)
H5-07
OFF 1: Enabled (RTS turns ON only
Selects the Protocol for the Com-
munication
Communications
H5-08 0: Memobus
Selection
1: N2 protocol
2: PI protocol
Sets the time before CE error
(Communication error) is detected
H5-09 CE detection time
when MEMOBUS communication
is used.
* Set H5-01 to 0 to disable Inverter responses to MEMOBUS communications.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
deceleration time in C1-02
deceleration time in C1-09
quency reference set in d1-04
when sending)
Change
Access
during
Setting Factory
Range Setting Level
Opera-
tion
0 to 20
1F No
*
0 to 4 3 No
0 to 2 0 No
0 to 4 3 No
0 or 1 1 No
5 to 65 5 ms No
0 or 1 1 No
0 to 2 0 No
0.0 to
2.0 sec No
10.0 sec
User Constant Tables
MEMO-
BUS Page
Register
A 425H 6-70
A 426H 6-70
A 427H 6-70
A 428H 6-70
A 429H 6-70
A 42AH 6-70
A 42BH 6-70
A 434H 6-70
A 435H
5-
31