Digital Operator; Digital Operator Display; Digital Operator Keys - YASKAWA Varispeed E7 Instruction Manual And Parameter Description

Digital Operator

This section describes the displays and functions of the Digital Operator.

Digital Operator Display

The key names and functions of the Digital Operator are described below.

Digital Operator Keys

The names and functions of the Digital Operator Keys are described in
Key
-2
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Fig 3.1 Digital Operator Component Names and Functions
Table 3.1 Key Functions
Name
LOCAL/REMOTE Key
MENU Key
ESC Key
Drive Mode Indicators
FWD: Lights up when a forward run command is
input.
REV: Lights up when a reverse run command is
input.
SEQ: Lights up when the run command from the
control circuit terminal is enabled.
REF: Lights up when the frequency reference from
control circuit terminals A1 and A2 is enabled.
ALARM: Lights up when an error or alarm has
occurred.
Data Display
Displays monitor data, constant numbers, and
settings.
Mode Display
DRIVE: Lights up in Drive Mode.
QUICK: Lights up in Quick Programming Mode.
ADV: Lights up in Advanced Programming Mode.
VERIFY: Lights up in Verify Mode.
A. TUNE:Lights up in Autotuning Mode.
Keys
Execute operations such as setting user con-
stants, monitoring, jogging, and autotuning.
Table
Function
Switches between operation via the Digital Operator (LOCAL) and
control circuit terminal operation (REMOTE).
This Key can be enabled or disabled by setting user constant o2-01.
Selects modes.
Returns to the status before the DATA/ENTER Key was pressed.
3.1.