Trial Operation Procedure
Perform trial operation according to the following flowchart.
Select operating
method.
-2
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
START
Installation
Wiring
*1
Set power supply voltage.
Turn ON power
Confirm status
Basic settings
(Quick programming mode)
Set E1-03.
V/f default: 200V/50Hz (400V/50Hz)
Motor cable over
50 m or heavy load possibly
causing motor to stall or
overload?
NO
Application settings
(Advanced programming mode)
No-load operation
Loaded operation
Optimum adjustments and
constant settings
Check/record constants.
END
Fig 4.1 Trial Operation Flowchart
YES
Stationary autotuning for
line-to-line resistance only
*1. Set for 400 V Class Inverter for 75 kW or more.