Advanced Programming Mode - YASKAWA Varispeed E7 Instruction Manual And Parameter Description

Advanced Programming Mode

In advanced programming mode all Inverter constants can be monitored and set.
Constants can be changed from the setting displays. Use the Increment, Decrement, and Shift/RESET keys to
change the constant. The user constant will be written and the display will return to monitor display when the
DATA/ENTER key is pressed after changing the setting.
Refer to Chapter 5 User Constants
Example Operations
Key operations in advanced programming mode are shown in the following figure.
Mode Selection Display
Advanced Programming Mode
-8
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
for details on the constants.
Function Selection Display
Setup settings: A1-xx
PI control: b5-xx
Copy functions: 03-xx
Fig 3.6 Operations in Advanced Programming Mode
Monitor Display
Language
Access level
Initialize
PI control mode selection
Proportional gain
PI feedback command
loss detection time
Copy function selection
Read permitted selection
Setting Display