Drive Mode - YASKAWA Varispeed E7 Instruction Manual And Parameter Description

Drive Mode

The Drive mode is the mode in which the Inverter can be operated. The following monitor displays are possi-
ble in drive mode: The frequency reference, output frequency, output current, and output voltage, as well as
fault information and the fault history.
When b1-01 (Reference selection) is set to 0, the frequency can be changed from the frequency setting dis-
play. Use the Increment, Decrement, and Shift/
written and the monitor display will be returned to when the
setting.
Example Operations
Key operations in drive mode are shown in the following figure.
Mode Selection Display
IMPORTANT
-6
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Monitor Constant Display Deleted Monitor Constant
Power On
Drive Mode
Frequency reference
Output frequency
Output current
Monitor setting for o1-01
Status Monitor
Fault Trace
Fault History
Fig 3.4 Operations in Drive Mode
The first monitor constant (frequency reference) will be displayed when power is turned ON. The monitor
item displayed at startup can be set in o1-02 (Monitor Selection after Power Up).
Operation cannot be started from the mode selection display.
keys to change the frequency. The user constant will be
RESET
DATA/ENTER
Display
Frequency reference setting/
display unit 01-03
Frequency reference
Fan operating time
Current error
Operating time at error
1st previous error
Operating time at 4th
previous error
key is pressed after changing the
Monitor Display