User Constant Descriptions; Description Of User Constant Tables - YASKAWA Varispeed E7 Instruction Manual And Parameter Description

User Constant Descriptions

This section describes the contents of the user constant tables.

Description of User Constant Tables

User constant tables are structured as shown below. Here, b1-01 (Frequency Reference Selection) is used as
an example.
Con-
stant
Number
Reference selec-
b1-01
tion
• Constant Number:
• Name:
• Description:
• Setting Range:
• Factory Setting:
• Change during Operation:
• Access Level:
• MEMOBUS Register:
• Page:
-2
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Name Description
Sets the frequency reference
input method.
0: Digital Operator
1: Control circuit terminal
(analog input)
2: MEMOBUS communications
3: Option Card
The number of the user constant.
The name of the user constant.
Details on the function or settings of the user constant.
The setting range for the user constant.
The default setting of the user constant.
Indicates whether or not the constant can be changed while the
Inverter is in operation.
Yes: Changes are possible during operation.
No: Changes are not possible during operation.
Indicates the constant access level in which the constant can be
changed or monitored.
Q:
A:
The register number used for MEMOBUS communications.
Reference page for more detailed information about the constant.
Setting Factory
Range Setting
0 to 3 1
Quick programming mode and advanced programming mode.
Advanced programming mode only.
Change
MEMO-
Access
during
BUS Page
Opera- Level
Register
tion
No Q 180H –