Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 305

Figure 8-40
The calculated and the actually traveled curve are displayed. The following buttons can be used
to display additional information.
Table 8-4 Buttons, x/y display
Button
Note
The curves drawn in the diagram are always relative to the lower edge of the spreader.
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
SIMOCRANE CeCOMM commissioning and diagnostic program
Diagram function, X/Y representation with blocked regions
Short name
Interpolation points
Blocked regions
MAN-Obstacles
Description
Add the curve with the interpolation points used as basis for calcu‐
lating the travel curve.
Display all blocked regions (fixed and variable). If the "Cyclical re‐
fresh" option is selected, the internally learned, variable blocked re‐
gions on the waterside will be updated continuously as the crane is
traveling.
This switches between the blocked regions for the MAN and SAM
modes.
8.7 Diagram - trace function
305