Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 240

TLS control function description
7.1 Requirements
(1) (2) (3) (4)
(*)
Figure 7-4
The tables below explain the effects of the directions of movement of the cylinder and the skew
drive on the suspension points.
Table 7-1
Direction of movement
(1) Cylinder
Movement of a cylinder in direction max+
(1) Cylinder
Simultaneous movement of
● cylinders A and C in direction max+ and
● cylinders B and D in direction max-
(3) Electric drive
Movement of skew drive in CCW direction
240
For an explanation, see Table "Directions of movement"
For an explanation, see Table "Directions of movement for skew"
Directions of movement
Directions of movement
Result
(2) Spreader
Movement of the corresponding suspension point
in direction pos+
(4) Camera measuring system
Rotary movement in CCW direction is measured
(2) Spreader
Motion
● of suspension points P
+ (up) and
● of suspension points P
pos- (down)
(4) Camera measuring system
These combine to give a rotational movement in
direction CCW
Operating Instructions, 07/2019, A5E48271265B AA
and P in direction pos
A C
and P in direction
B D
SC integrated STS, GSU