Figure 8-17
The marked areas have the following signals:
①
②
③
④
⑤
⑥
Monitor 9
Monitor 9 shows control bits and status bits for TLS (see also the Tables in Chapters TLS
(Page 90) and TLS (Page 104)). This display screen can be used to verify the correct control.
The CeCOMM trace function is used for detailed analysis of signals.
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
SIMOCRANE CeCOMM commissioning and diagnostic program
Monitor 8
psi_cam (psi_kam)
psi_model (psi_modell)
psi_ofs_model (psi_ofs_modell)
Frequency skew oscillation (normalized angular frequency skew oscillation)
Position hoist
Mode TLS motion
s_target_abcd [mm]
s_target_TLSh [mm]
s_target_S
converted to centigrade: s_target_S · P280
psip_cam (psip_kam)
psip_model (psip_modell)
8.5 Monitor (tab)
281