Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 265

Note
Most of the available functions can be operated by clicking a button (e.g. "F2-History") and also
pressing the key (e.g. "F2") shown on the button. The following description only describes the
button.
Note
The displayed menus, functions and dialogs in the function part depend on the connected
device or system and so can vary greatly.
The status bar contains the IP address of the connected device and the interface version, in
addition to the version of the DCC library and the loaded *.ini file. This icon can also be used to
always keep the window in the foreground, even when it is not active. Pressing the icon again
deactivates this function.
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
SIMOCRANE CeCOMM commissioning and diagnostic program
8.2 Design and operation
265