Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 300

SIMOCRANE CeCOMM commissioning and diagnostic program
8.7 Diagram - trace function
These files can now be loaded and evaluated. To do this, select "File" → "Reload longtime
traces".
Figure 8-35
You can select a file (*.dat format) from the "LongTraces" directory in the next dialog box.
Button
Button
300
Loading the longtime trace
Short name
Options
Delete curves
Refresh
Start
Stop
Load file
Save file
Print
View
Properties
Description
The functions "Measuring cursor", "Open info series...", "Crop
selected area", "Save selected area as...", "Measuring points"
and "TimeStamp" are available via the dropdown list.
Delete the diagram. If individual elements of the display are to be
removed again, this can be realized by deactivating the appro‐
priate checkbox in the legend on the right-hand side.
The functions "Auto" (automatic refresh of diagram), "Interpola‐
tion points", "Blocked regions" and "Limit lines" are available via
the dropdown list.
Select which axes and parameters should be traced and start the
trace task.
End recording.
Load existing "*.dgr" diagram file.
Save the diagram content (data) in a "*.dgr file."
Print the diagram after selecting the printer and the print preview.
Select the displayed parameters and change the properties.
Change the properties of the diagram, such as the designation of
all parameters and axes, limits and colors.
Operating Instructions, 07/2019, A5E48271265B AA
SC integrated STS, GSU