Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 26

Overview of the software
3.1 Application projects
● FB_HoistPLCToAddOn
● FB_HoistAddOnToPLC
● FB_TrolleyPLCToAddOn
● FB_TrolleyAddOnToPLC
● FB_IntpoPLCToAddOn
● FB_IntpoAddOnToPLC
● FB_ObstaclePLCToAddOn
● FB_ObstacleAddOnToPLC
● FB_AddDataPLCToAddOn
● FB_AddDataAddOnToPLC
DCC blocks
● DCC_SCCOMMON
● DCC_SCHOIST
● DCC_SCTROLLEY
● DCC_INTPO
● DCC_SCOBSTACLES
● DCC_SCDIAG
Inclusion of the blocks in execution levels
The blocks are calculated in the following execution groups:
● The DCC blocks in "SwayControl" operate in the sampling time of the SIMOTION
interpolator cycle (T2). One exception is the DCC_SCDIAG block, which must be in T3.
● The function blocks in the "AddOn" MCC source file operate in a cyclical execution level.
Connections
The required connections are contained in the tables for the connections of the required DCC
and FB blocks ("Variables" column) in Chapters AddOn DCC library (Page 37) and AddOn FB
library (Page 58).
26
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA