Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 296

SIMOCRANE CeCOMM commissioning and diagnostic program
8.7 Diagram - trace function
Only the x value, i.e. the time (in the example, 15.02 seconds), of the measuring cursor is
displayed on the left-hand side below the diagram.
Fix the measuring cursor by pressing the space bar. The first measuring cursor is now fixed and
a second measuring cursor appears. You can move this to the required position using the
mouse pointer.
The key combination Ctrl + left mouse button displays the value and the time of the second point
on a signal trace, in addition to the time difference between the first and the second point.
Figure 8-29
When the measuring cursor is active, select "Open info series..." in the dropdown list to open
an information window. If only one measuring cursor is active, all the values active in the legend
on the right-hand side are displayed in the information window at the time specified by the
measuring cursor. If the second measuring cursor is active, two columns are automatically
added to the information window. The first additional column contains the values at the time of
the second measuring cursor and the second additional column contains the differences
between the values at the two measuring cursors.
296
Measuring cursor function – Second measuring cursor
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA