Advertisement
Available languages
Available languages
250
200
150
100
50
0
When the user presses the START button, the LCD display shows the WATT profile based on the user´s
individual settings.
To adjust the WATT, press the UP and DOWN button, the program will count down time form the preset time,
and DISTANCE, CALORIES will count up from zero.
When start the program, press the STOP button to pause the program, the program will come in POWER ON
mode when the user press the STOP button twice.
When the preset time count down has been achieved, the LCD display will stop the program along with a beep.
Metric (KM) to English (ML) conversion
The computer display can show both English and Metric information, if you want to change from the Metric to
English, Please follow the below procedure:
When the computer is in the POWER ON status. Press and hold the "STOP" button then press the "UP" button.
The LCD will display E-I and the number 1, you can select 2 by pressing the UP/DOWN button. Press the START
button during the selection mode, the LCD will show the "KM/H" or "MPH". Select set KM/H or MPH by
pressing the UP/DOWN button, and then press the ENTER button to confirm.
It was showing "KM/H" unit if the user do not set up the program. The computer will show distance with the
unit which the user setting. The computer just can use the "UP" "DOWN" "STOP" button when setting the
program.
Time/Min
GB
D
Level 1
Level 2
Level 3
Advertisement
