Polar Electro Reebok 5.7e Manual page 24

GB
D
PROGRAM
To select one of the User programs, you will need to select the USER CODE first, press the UP/DOWN button to
select the USER CODE from U1 to U9. This is shown in the SPEED display. Press the ENTER button to confirm
the USER CODE. If the user information has been previously input, press ENTER button and hold for 5 seconds,
The computer will then skip the user information set up procedure and enter the program select procedure. To
input new information , please follow the below procedure.
USER HEIGHT
After the USER Code has been confirmed the SPEED display will show HEIGHT or the previous setting and begin
flashing. Press the UP/DOWN button to adjust the user height information, and then press ENTER to confirm.
USER WEIGHT
After the HEIGHT has been confirmed the TIME display will show WEIGHT or the previous setting and begin
flashing. Press the UP/DOWN button to adjust the user weight information, then press ENTER to confirm.