Gateway; Table 47: Cable And Wire Specifications For Alarm Interfaces; Table 48: Cable And Wire Specifications For Routing Engine Management And Alarm Interfaces - Juniper SRX5400 Hardware Manual

Related
Documentation
Console Port Cable and Wire Specifications for the SRX5400 Services Gateway
Related
Documentation
Alarm Relay Contact Wire Specifications for the SRX5400 Services Gateway
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Console Port Cable and Wire Specifications for the SRX5400 Services Gateway on
page 123
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
on page 185
Table 46 on page 123 lists the specifications for the cable that connects a
on the Routing Engine to a management console.
Table 46: Cable and Wire Specifications for Routing Engine Management
and Alarm Interfaces
Cable
Port Specification
Routing Engine RS-232 (EIA-232)
console or serial cable
auxiliary interface
Connecting the SRX5400 Services Gateway to a Management Console or an Auxiliary
Device on page 184
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Auxiliary
and Console Ports on page 122
Table 47 on page 123 lists the specifications for the wires that connect to the alarm relay
contacts.

Table 47: Cable and Wire Specifications for Alarm Interfaces

Port Cable Specification
Alarm relay contacts Wire with gauge between 28-AWG and
14-AWG (0.08 and 2.08 mm
SRX5400 Services Gateway Craft Interface Alarm Relay Contacts on page 23
Connecting an SRX5400 Services Gateway to an External Alarm-Reporting Device on
page 185
Troubleshooting the SRX5400 Services Gateway with Alarm Relay Contacts on page 228
Chapter 13: Cable Specifications and Pinouts
Maximum
Cable/Wire Supplied Length
One 6-ft (1.83-m) 6 ft (1.83 m)
length with
RJ-45/DB-9
connectors
2
)
port
CONSOLE
Receptacle
RJ-45/DB-9
male
Cable/Wire Supplied
No
123