Returning The Monitor - Nellcor N-180 Service Manual

Section 1: Introduction
* In text, active low logic signals are designated by an asterisk after the
signal name (for example SIGNAL*). On logic diagrams a virgule ()
before or after the signal name designates logic low active. In addition,
an over score also designates logic low on some schematic device
symbols,
* Signal names are printed in all capital letters.
« Fold out illustration numbers are preceded by the letters FO.
. The front panel switch that controls operating power to the monitor
bears symbolic marks that are difficult to set in type. Therefore, the
term ON/STDBY is substituted for the symbolic marking.
RETURNING THE MONITOR
If you must return the monitor to Nelicor, call Nellcor's Technical Services
department for shipping instructions. To facilitate repair or replacement
processing Nellcor will give you a return goods authorization (RGA) number.
To repackage the CO2 indicator disconnect the sensor and the power cable.
Carefully pack the monitor in the original shipping carton. If the original
carton is unavailable, use a suitable carton with an appropriate amount of
packing material. Mark the shipping carton and any shipping forms with the
RGA number.
13