Setting Up The Monitor - Nellcor OxiMax N-595 Operator's Manual

S e t t i n g u p t h e M o n i t o r
WARNING: To ensure patient safety, do not place the pulse
oximeter in any position that might cause it to fall on the patient.
WARNING: As with all medical equipment, carefully route
patient cabling to reduce the possibility of patient entanglement
or strangulation.
WARNING: Ensure that the speaker is clear of any obstruction.
Failure to do so could result in an inaudible alarm tone.
WARNING: Disconnect the N-595 and Nellcor O M sensor
XI AX
from the patient during magnetic resonance imaging (MRI)
scanning. Induced current could potentially cause burns.
WARNING: To ensure accurate performance and prevent device
failure, do not subject the N-595 to extreme moisture, such as
direct exposure to rain. Such exposure may cause inaccurate
performance or device failure.
WARNING: Do not use an N-595 pulse oximeter, O M sensor,
XI AX
cables, or connectors that appear damaged.
WARNING: Do not lift the pulse oximeter by the pulse oximetry
cable or power cord because the cable or cord could disconnect
from the pulse oximeter, causing the pulse oximeter to drop on
the patient.
N-595 15