Printing
Trend Data Printout
The format of data displayed when a trend printout is requested is the
same as the real-time data. The only differences are that "TREND" is
displayed in the top row instead of the "CRC: XXXX" software
verification number and there is no "Status" column.
Readings are displayed in 4-second intervals. The values on each row are
an average for the 4-second period.
At the end of the printout, an "Output Complete" line indicates that the
transmission was successful. If the "Output Complete" line is not present,
a corruption of the data may have been detected and the data should be
ignored.
Figure 5: Trend Data Printout
Once a trend printout has begun, the N-560 must be turned off and back
on again before a new trend printout can begin.
N-560 Operator's Manual
57