Install Software Update (If Any) - Avaya S8500 Manual

Migrating to the media server
Hide thumbs Also See for S8500:
Table of Contents

Advertisement

5
Select the backup set to restore and both force options and click Restore.
If the backup version is a mismatch, click Force Restore.
6
Click Status to view the restore progress.
7
Select the backup set and click Check Status to view the restore progress.
8
The restoration is complete when the following message displays:
Backup: 0: Restore of <filepath/filename> is completed successfully.
NOTE:
If on media server 2, return to

Install software update (if any)

NOTE:
Skip this procedure if there is no Communication Manager software update file to install.
This software update may or may not be call preserving.
Use a telnet session to install the software update file.
1
Click Start > Run to open the Run dialog box.
2
Type
telnet 192.11.13.6
3
Log in as craft.
4
Type
cd /var/home/ftp/pub
5
At the prompt, type
The media server displays a list of files in the FTP directory. Verify that the directory contains the
Communication Manager .tar.gz file you have uploaded, if any.
6
Type
sudo update_unpack update.tar.gz
latest software update file. (For example, 00.0.411.0-xxxx.tar.gz). Press Enter.
7
Type
update_show
software update file was unpacked.
8
Type
sudo update_activate update
software update file. (For example, 00.0.411.0-xxxx. Do not use the .tar.gz extension at the end of
the file name). Press Enter.
The media server may reboot (reset system 4). If it reboots, it also may display the message
/opt/ecs/sbin/drestart 2 4 command failed
Ignore this message. You must wait until the restart/reset completes before entering additional
commands.
The media server displays a message that the software update (patch) was applied.
9
Type
update_show
software update file was activated.
Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Migrating from an S8700 Media Server to an S8710 Media Server
Connect duplication cables
and press Enter.
and press Enter to access the pub directory.
ls -ltr
and press Enter to list files in the pub directory.
, where
and press Enter to list Communication Manager files to verify the new
, where
update
again and press Enter to list Communication Manager files to verify the new
On first S8710 Media Server
on page 159.
update
is the release or issue number of the
is the release or issue number of the latest
.
3
157

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8700S8710

Table of Contents