Monitor Commands - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Card, MDA, and Port Command Reference

Monitor Commands

For more information about monitor commands, refer to the 7750 SR OS Basic System Configuration
Guide for command usage and CLI syntax.
Monitor
Clear Commands
clear
Debug Commands
debug
Tools Commands
tools
Page 254
— port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]
— port atm [interval seconds] [repeat repeat] [absolute | rate]
— card slot-number soft
— lag lag-id statistics
— mda mda-id [statistics]
— port port-id statistics
— port port-id statistics
— port port-id atm pvc [vpi[/vci]] statistics
— port port-id atm pvp [vpi] statistics
— port port-id atm pvt [vpi1.vpi2] statistics
— port port-id atm ilmi statistics
— port port-id atm interface-connection statistics
— port port-id queue-group queue-group-name [access | network] {ingress | egress} [access|network]
[{statistics|associations}]
— atm
— cisco-hdlc port-id
— frame-relay
— lmi [port-id]
— [no] frf16 port-id
— lag [lag-id lag-id port port-id] [all]
— lag [lag-id lag-id port port-id] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-logic] [mc]
[mc-pkt]
— no lag [lag-id lag-id]
— [no] ppp port-id
— dump
— aps aps-id [clear]
— aps mc-aps-signaling [clear]
— aps mc-aps-ppp [clear]
— eth-tunnel tunnel-index [clear]
— frame-relay port-id
7750 SR OS Interface Configuration Guide