Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 347

Parameters
seconds — The server timeout period in seconds.
transmit-period
Syntax transmit-period seconds
no transmit-period
Context config>port>ethernet>dot1x
Description
This command configures the period after which the 7750 SR sends a new EAPOL request message.
The no form of this command returns the value to the default.
Default 30
Parameters
seconds — The server transmit period in seconds.
down-when-looped
Syntax down-when-looped
Context config>port>ethernet
Description
This command configures Ethernet loop detection attributes.
dot1x
Syntax dot1x
Context config>port>ethernet
Description
This command enables access to the context to configure port-specific 802.1x authentication
attributes. This context can only be used when configuring a Fast Ethernet, gigabit or 10Gig
EthernetFast Ethernet, gigabit or 10Gig EthernetFast Ethernet or gigabit Ethernet LAN ports on an
appropriate MDA.
keep-alive
Syntax keep-alive timer
no keep-alive
Context config>port>ethernet>dwl
7750 SR OS Interface Configuration Guide
Values
1 — 300
Values
1 — 300
Interface Configuration
Page 347