Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 550

Show Commands
ATM PVT Detail Output Fields
Output Port ATM PVT Detail Output — The following table describes port ATM PVT detail output
fields.
Sample Output
A:SR1_5>config>service# show port 1/2/2 atm pvt 0.0 detail
==============================================================================
ATM PVT
==============================================================================
Port Id
Admin State
Owner
Page 550
Label
Port Id
VPI/VCI
Admin State
Oper State
Encap Type
Owner
Endpoint Type
Cast Type
Ing. Td Idx
Egr. Td Idx
Last Changed
Octets
Cells
Dropped CLP
Dropped Cells
Tagged Cells
: 1/2/2
: up
: SAP
The port ID configured or displayed in the slot/mda/port format.
Displays the VPI/VCI values.
Displays the administrative state of the interface connection.
Indicates the status of the ATM interface.
Indicates the encapsulation type.
Identifies the system entity that owns a specific ATM connection.
Displays the endpoint type.
Indicates the connection topology type.
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Indicates the date and time when the interface connection entered its
current operational state.
Displays the number of input and output octets.
HEC discarded cells are not included in the input octet numbers.
Displays the number of input and output cells.
HEC discarded cells are not included in the input cell numbers.
Displays the number of times the CLP1 cells have been dropped. CLP1
cells have lower priority than CLP0 cells and are expected to be dis-
carded first in times of congestion.
Displays the number of cells dropped by the ATM SAR device.
Displays the number of cells that have been demoted from CLP0 to
CLP1.
VPI Range
Oper state
7750 SR OS Interface Configuration Guide
Description
: 0.0
: up