Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 233

7750 SR OS Interface Configuration Guide
— secondary-shaper
— secondary-shaper
— autonegotiate [limited]
— [no] autonegotiate
— dot1q-etype
— no dot1q-etype
— dot1x
— max-auth-req
— port-control {auto | force-auth | force-unauth}
— quiet-period seconds
— radius-plcy name
— re-auth-period
— [no] re-authentication
— server-timeout
— no server-timeout
— supplicant-timeout
— no supplicant-timeout
— transmit-period
— no transmit-period
— down-when-looped
— keep-alive timer
— no keep-alive
— retry-timeout
— no retry-timeout
— [no] shutdown
— [no] use-broadcast-address
— duplex {full | half}
— efm-oam
— [no] accept-remote-loopback
— hold-time time-value
— no hold-time
— mode {active | passive}
— [no] shutdown
— [no] transmit-interval
— [no] tunneling
— egress-rate sub-rate
— no egress-rate
— [no] egress-scheduler-override
— level priority-level rate pir-rate [cir cir-rate]
— no level priority-level
— max-rate rate
— no max-rate
Command Reference
— adaptation-rule
[cir {max | min | closest}]
— no adaptation-rule
— cbs size-in-kbytes
— no cbs
— high-prio-only
— no high-prio-only
— mbs size-in-kbytes
— no mbs
— rate pir-rate [cir cir-rate]
— no rate
— scheduler-policy scheduler-policy-name
— no scheduler-policy
secondary-shaper-name rate {max | rate}
secondary-shaper-name
max-auth-request
seconds
seconds
seconds
seconds
timer
interval [multiplier multiplier]
[pir {max | min | closest}]
percent
Page 233