Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 334

Configuration Commands
Default transmit-interval 10 multiplier 5
Parameters
interval — Specifies the transmit interval.
multiplier multiplier — Specifies the multiplier for transmit-interval to set local link down timer.
tunneling
Syntax [no] tunneling
Context config>port>ethernet>efm-oam
Description This command enables EFM OAM PDU tunneling. Enabling tunneling will allow a port mode Epipe
SAP to pass OAM frames through the pipe to the far end.
The no form of the command disables tunneling.
Default
no tunneling
egress-rate
Syntax egress-rate sub-rate
no egress-rate
Context config>port>ethernet
Description This command configures the rate of traffic leaving the network.
The no form of this command returns the value to the default.
Default
no egress-rate
Parameters
sub-rate — The egress rate in Kbps.
encap-type
Syntax encap-type {dot1q | null | qinq}
no encap-type
Context config>port>ethernet
Description This command configures the encapsulation method used to distinguish customer traffic on an
Ethernet access port, or different VLANs on a network port.
The no form of this command restores the default.
Page 334
Values 1 — 600 (in 100 milliseconds)
Values
2 — 5
Values
1 — 10000000
7750 SR OS Interface Configuration Guide