Configuring Lag Parameters - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Configuring LAG Parameters

LAG configurations should include at least two ports. Other considerations include:
•
•
•
The following example displays LAG configuration output:
A:ALA-A>config>lag# info detail
----------------------------------------------
----------------------------------------------
A:ALA-A>config>lag#
7750 SR OS Interface Configuration Guide
A maximum of eight ports can be included in a LAG. All ports in the LAG must share the
same characteristics (speed, duplex, hold-timer, etc.). The port characteristics are
inherited from the primary port.
Autonegotiation must be disabled or set limited mode for ports that are part of a LAG to
guarantee a specific port speed.
Ports in a LAG must be configured as full duplex.
description "LAG2"
mac 04:68:ff:00:00:01
port 1/1/1
port 1/3/1
port 1/5/1
port 1/7/1
port 1/9/1
dynamic-cost
port-threshold 4 action down
Interface Configuration
Page 217