Multi-Class Mlppp - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Configuring Ports

Multi-Class MLPPP

The following guidelines apply to multi-class MLPPP:
•
•
•
•
•
•
•
•
•
Page 210
MC-MLPPP must be configured before links are added to a bundle.
MC-MLPPP and LFI (config>port>multilink-bundle>interleave-fragments) are
mutually exclusive.
MC-MLPPP is not supported when port is configured as network mode.
MC-MLPPP can be enabled on every MLPPP bundle and bundle protection group.
MC-MLPPP is supported only on ASAP MDAs (for example, m4-choc3-as-sfp, m1-
choc12-as-sfp, m4-chds3-as, m12-chds3-as).
Short and long sequence packet formats are supported (both ends must be of the same
type) with static mapping of forwarding classes to MC-MLPPP class (based on the
number of classes negotiated with the far end).
Single fragment size for all classes is supported.
Prefix elision is not supported. The prefix elision (
option advises the peer that, in each of the given classes, the implementation expects to
receive only packets with a certain prefix; this prefix is not to be sent as part of the
information in the fragment(s) of this class.
Fractional DS1 MLPPP links are supported. This is applicableto MLPPP bundles on
ASAP MDAs.
compressing common header bytes
7750 SR OS Interface Configuration Guide
)