Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 409

framing (DS3)
Syntax framing {c-bit | m23}
Context config>port>tdm>ds3
Description
This command specifies DS-3 framing for the associated DS-3 port or channel.
Default c-bit
Parameters
c-bit — Configures the DS-3 port/channels for C-Bit framing.
m23 — Configures the DS-3 port/channel for M23 framing.
framing (E-3)
Syntax framing {g751 | g832}
Context config>port>tdm>e3
Description
This command specifies E-3 framing for the associated E-3 port or channel.
Default
E-3 non-ATM:
E-3 ATM:
Parameters
g751 — Configures the E-3 port/channel for g751 framing.
g832 — Configures the E-3 port/channel for g832 framing.
idle-cycle-flag
Syntax idle-cycle-flag {flags | ones}
Context config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1
config>port>tdm>e1>channel-group
config>port>tdm>e3
Description This command configures the value that the HDLC TDM DS-0, E-1, E-3, DS-1, or DS-3 interface
transmits during idle cycles. For ATM ports/channels/channel-groups, the configuration does not
apply and only the no form is accepted.
The no form of this command reverts the idle cycle flag to the default value.
Default
flags (0x7E)
no flags (ATM)
Parameters flags — Specifies that 0x7E is used as the idle cycle flag.
ones — Specifies that 0xFF is used as the idle cycle flag.
7750 SR OS Interface Configuration Guide
g751 and cannot be changed.
g832 and cannot be changed.
Interface Configuration
Page 409