Per-Fp-Ing-Queuing - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

LAG

Per-fp-ing-queuing

Per-fp-ing-queuing optimization for LAG ports provides the ability to reduce the number of
hardware queues assigned on each LAG SAP on ingress when the flag at LAG level is set for per-
fp-ing-queuing.
When the feature is enabled in the config>lag>access context, the queue allocation for SAPs on a
LAG will be optimized and only one queuing set per ingress forwarding path (FP) is allocated
instead of one per port.
The following rules will apply for configuring the per-fp-ing-queuing at LAG level:
•
•
•
•
Page 112
To enable per-fp-ing-queuing, the LAG must be in access mode
The LAG mode cannot be set to network mode when the feature is enabled
Per-fp-ing-queuing can only be set if no port members exists in the LAG
Per-fp-ing-queuing cannot be set if LAG's port-type is hsmda-ports.
7750 SR OS Interface Configuration Guide