Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 389

ingress
Syntax ingress
Context config>port>sonet-sdh>path>atm>ilmi
Description
This command enables the context to configure ingress traffic attributes for the ILMI link.
traffic-desc
Syntax traffic-desc traffic-desc-profile-id
no traffic-desc
Context config>port>sonet-sdh>path>atm>ilmi>egress
config>port>sonet-sdh>path>atm>ilmi>ingress
Description
This command associates an ATM traffic descriptor profile to an ILMI link. It is recommended to
change this to the traffic profile as defined in the ILMI specification.
Default atm-td-profile 1
Parameters
traffic-desc-profile-id — Specifies an existing ATM traffic descriptor profile. Traffic descriptor pro-
keep-alive
Syntax keep-alive [poll-frequency seconds] [poll-count value] [test-frequency seconds]
no keep-alive
Context config>port>sonet-sdh>path>atm>ilmi
Description This command configures keepalive parameters to monitor ILMI link connectivity.
The no form of this command resets the devault values on an ILMI link.
Last Config Change: 03/29/2007 20:35:19 Poll Count:4
Poll Freq:
Parameters poll-frequency seconds — Specifies the amount of time, in seconds, between successive
poll-count value — Specifies the number of consecutive polls on this interface for which no ILMI
7750 SR OS Interface Configuration Guide
files are configured in the config>qos>atm-td-profile context.
Values 1 — 1000
5
transmissions of ILMI messages on this interface for the purpose of detecting the establishment
of ILMI connectivity.
Values
1 — 255
response message is received before ILMI connectivity is declared lost.
Values 1 — 255
Test Freq: 1
Interface Configuration
Page 389