Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 172

Configuring Ports
Verify the MDA Type
To make sure you have a channel-capable MDA, verify the MDA-type you are configuring by
entering a show mda slot-id command.
The MDAs displayed in the MDA Provisioned column in the following output are a 12-port
channelized DS3 MDA (m12-ds3) on card 1, MDA slot 1, and a 1-port channelized OC12-SFP
MDA (m1-choc12-sfp) on card 1, MDA slot 2.
A:ALA-A# show mda 1
===============================================================================
MDA 1/1
===============================================================================
Slot Mda
-------------------------------------------------------------------------------
1 1
===============================================================================
ALA-A# show mda 2
===============================================================================
MDA 1/2
===============================================================================
Slot Mda
-------------------------------------------------------------------------------
1 2
===============================================================================
A:ALA-A#
Page 172
Provisioned
Mda-type
m12-ds3
Provisioned
Mda-type
m1-choc12-sfp
7750 SR OS Interface Configuration Guide
Equipped
Mda-type
m12-ds3
Equipped
Mda-type
m1-choc12-sfp
Admin Operational
State State
up provisioned
Admin Operational
State State
up provisioned