Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 502

Show Commands
Sample Output
show aps on a working multi-chassis APS node:
*A:Dut-A# show aps aps-1
===============================================================================
APS Group Info
===============================================================================
Interface Admin
-------------------------------------------------------------------------------
aps-1
===============================================================================
*A:Dut-A#
*A:Dut-A# show aps aps-1 detail
===============================================================================
APS Group: aps-1
===============================================================================
Description
Group Id
Admin Status
Working Circuit
Switching-mode
Revertive-mode
Rx K1/K2 byte
Tx K1/K2 byte
Current APS Status : OK
Multi-Chassis APS
Neighbor
Control link state : N/A
Advertise Interval : 1000 msec
APS SF Hold Time
Mode mismatch Cnt
PSB failure Cnt
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Admin Status
Page 502
Label
Signal Failure
Cnt
Last Switch Cmd
Last Exercise
Result
Neighbor address
Advertise Inter-
val
Hold time
Oper
State State
Up Up
: APS Group
: 1
: Up
: 1/5/1
: Uni-1plus1
: Non-revertive
: 0x00/0x00 (No-Req on Protect)
: 0x00/0x00 (No-Req on Protect)
: No
: 0.0.0.0
: 6000 msec
: 0
: 0
APS Working Circuit - 1/5/1
: Up
Description (Continued)
Displays the number of times the signal failed.
Reports the last switch command that was performed on a circuit.
The result of the last exercise request on a circuit.
Displays the neighbor IP address.
Displays the advertise interval.
Displays the hold time.
MC-Ctl Work Prot
State Circuit Circuit
N/A 1/5/1 1/9/5
Active Circuit
Oper Status
Protection Circuit
Switching-arch
Revert-time (min)
Hold Time
APS SD Hold Time
Channel mismatch Cnt : 0
FEPL failure Cnt
Oper Status
7750 SR OS Interface Configuration Guide
Active Tx/Rx
Circuit K1 Byte
1/5/1 PC-Tx: No-Req
: 1/5/1
: Up
: 1/9/5
: 1+1(sig,data)
:
: 3000 msec
: 9000 msec
: 0
: Up