Figure 24: Mc-Lag Dual Homing To Remote Pe Pairs - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

LAG
•
A
MSAN
B
MSAN
Figure 24
configurations can be sub-divided into following sub-groups:
•
•
Page 118
→ Verification that the physical characteristics, such as speed and auto-negotiation is
configured and initiates operator notifications (traps) if errors exist. Consistency of
MC-LAG configuration (system-id, administrative-key and system-priority) is
provided. Similarly, load-balancing mode of operation must be consistently
configured on both nodes.
→ Traffic over the signalling link is encrypted using a user configurable message digest
key.
MC-LAG function provides active/stand-by status to other software applications in order
to built a reliable solutions.
PE-A
MG-
LAG
PE-B
PE-A
MG-
LAG
PE-B

Figure 24: MC-LAG Dual Homing to Remote PE Pairs

depicts different combinations of MC-LAG attachments supported. The supported
Dual-homing to remote PE pairs
→ both end-points attached with MC-LAG
→ one end-point attached
Dual-homing to local PE pair
→ both end-points attached with MC-LAG
→ one end-point attached with MC-LAG
→ both end-points attached with MC-LAG to two overlapping pairs
PE-D
IR MPLS
Network
PE-C
IR MPLS
PE-C
Network
7750 SR OS Interface Configuration Guide
MG-
MSAN
LAG
MSAN