Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 547

ATM PVC Detail Output Fields
Output Port ATM PVC Detail Output — The following table describes port ATM PVC detail output
fields.
7750 SR OS Interface Configuration Guide
Label
Port Id
VPI/VCI
Admin State
Oper State
OAM State
Encap Type
Owner
AAL Type
Endpoint Type
Cast Type
Type
Ing. Td Idx
Egr. Td Idx
Last Changed
Octets
Cells
Packets
Dropped Packets
The port ID configured or displayed in the slot/mda/port format.
Displays the VPI/VCI values.
Displays the administrative state of the interface connection.
Indicates the status of the ATM interface.
Indicates the OAM operational status of ATM connections.
ETE indicates end-to-end connection.
AIS denotes alarm indication signal.
RDI denotes for remote defect indication.
LOC indicates the alarm was due to loss of continuity.
Indicates the encapsulation type.
Identifies the system entity that owns a specific ATM connection.
Displays ATM Adaptation Layer 5 (AAL5) information.
Displays the endpoint type.
Indicates the connection topology type.
Indicates the connection type.
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Indicates the date and time when the interface connection entered its
current operational state.
Displays the number of input and output octets.
HEC discarded cells are not included in the input octet numbers
Displays the number of input and output cells.
HEC discarded cells are not included in the input cell numbers
Displays the number of input and output packets.
Packets discarded due to HEC or oversize discards are not counted.
CRC errors are also in the packet counts show up on the VC level sta-
tistics but not on the port level.
Displays the number of packets dropped by the ATM SAR device.
Interface Configuration
Description
Page 547