Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 352

Configuration Commands
Parameters policy-id — The accounting policy-id of an existing policy. Accounting policies record either service
collect-stats
Syntax [no] collect-stats
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
config>port>ethernet>network
config>port>sonet-sdh>path>network
config>port>tdm>ds3>network
config>port>tdm>e1>network
config>port>tdm>e3>network
Description This command enables the collection of accounting and statistical data for the network interface.
When applying accounting policies, the data, by default, is collected in the appropriate records and
written to the designated billing file.
When the no collect-stats command is issued, the statistics are still accumulated by the IOM cards,
however, the CPU does not obtain the results and write them to the billing file.
If the collect-stats command is issued again (enabled), then the counters written to the billing file
will include the traffic collected while the no collect-stats command was in effect.
Default no collect-stats
queue-policy
Syntax queue-policy name
no queue-policy
Context config>port>ethernet>network
config>port>sonet-sdh>path>network
config>port>tdm>ds1>network
config>port>tdm>ds1>network
config>port>tdm>ds3>network
config>port>tdm>e1>network
config>port>tdm>e3>network
Description
This command specifies the existing network queue policy which defines queue parameters such as
CBS, high priority only burst size, MBS, CIR and PIR rates, as well as forwarding-class to queue
mappings. The network-queue policy is defined in the config>qos>network-queue context.
Default
default
Page 352
(access) or network information. A network accounting policy can only be associated with the
network port configurations. Accounting policies are configured in the config>log>accounting-
policy context.
Values 1 — 99
7750 SR OS Interface Configuration Guide