Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 107

Operators may sometimes require the capability to query the system for the link in a LAG or
Ethernet tunnel that is currently assigned to a given service-id or ISID. This ability is provided
using the tools>dump>map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index}
{isid isid [end-isid isid] | service servid-id | svc-name [end-service service-id | syc-name]}
[summary] command.
A sample usage is as follows:
A:Dut-B# tools dump map-to-phy-port lag 11 service 1
ServiceId
---------- ------------- --------------
1
A:Dut-B# tools dump map-to-phy-port lag 11 isid 1
ISID
-------- -----------------------
1
A:Dut-B# tools dump map-to-phy-port lag 11 isid 1 end-isid 4
ISID
-------- -----------------------
1
2
3
4
7750 SR OS Interface Configuration Guide
ServiceName ServiceType
i-vpls
Hashing
per-service(if enabled)
Hashing
per-service(if enabled)
per-service(if enabled)
per-service(if enabled)
per-service(if enabled)
Hashing
-----------------------
per-service(if enabled)
Physical Link
-------------
3/2/8
Physical Link
-------------
3/2/8
3/2/7
1/2/2
1/2/3
Interface Configuration
Physical Link
-------------
3/2/8
Page 107