Monitor Commands - Alcatel-Lucent 7450 ESS Series Configuration Manual

Monitor Commands

instance
Syntax
Context
Description
Parameters
Page 340
instance interface interface-name vr-id virtual-router-id [interval seconds] [repeat repeat]
[absolute | rate]
monitor>router>vrrp
Monitor statistics for a VRRP instance.
interface-name — The name of the existing IP interface on which VRRP is configured.
vr-id virtual-router-id — The virtual router ID for the existing IP interface, expressed as a decimal
integer.
interval seconds — Configures the interval for each display in seconds.
Default
5 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default
10
Values
1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
of the delta.
Sample Output
*A:ALA-A# monitor router vrrp instance interface n2 vr-id 1
===============================================================================
Monitor statistics for VRRP Instance 1 on interface "n2"
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Become Master : 1
Adv Sent : 1439
Pri Zero Pkts Sent : 0
Preempt Events : 0
Mesg Intvl Discards : 0
Addr List Discards : 0
Auth Type Mismatch : 0
Invalid Auth Type : 0
IP TTL Errors : 0
Total Discards : 0
===============================================================================
*A:ALA-A#
Master Changes
Adv Received
Pri Zero Pkts Rcvd: 0
Preempted Events
Mesg Intvl Errors : 0
Addr List Errors
Auth Failures
Invalid Pkt Type
Pkt Length Errors : 0
7450 ESS OS Router Configuration Guide
: 1
: 0
: 0
: 0
: 0
: 0