Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 279

ddm-events
Syntax [no] ddm-events
Context config>port
Description This command enables Digital Diagnostic Monitoring (DDM) events for the port.
The no form of the command disables DDM events.
dwdm
Syntax dwdm
Context config>port
Description
This command configures the Dense Wavelength Division Multiplexing (DWDM) parameters.
7750 SR OS Interface Configuration Guide
For line alarms, separately, modify the 2 physical ports that are members of the logical aps-id
port (the working and protect lines). APS reacts only to line alarms, not path alarms.
For example:
configure port 1/2/3 sonet-sdh report-alarm lb2er-sd
configure port 1/3/4 sonet-sdh report-alarm lb2er-sd
For example:
A:ALA-48>config>port>aps# info
----------------------------------------------
working-circuit 1/2/3
protect-circuit 1/3/4
----------------------------------------------
A:ALA-48>config>port>aps#
If the SD and SF threshold
level on both the working and protect APS port member.
The no form of this command deletes an aps-group-id or bundle-aps-group-id. In order for an
aps-group-id to be deleted,
The same rules apply for physical ports, bundles deletions apply to APS ports/bundles deletions
(for example an aps-group-id must be shutdown, have no service configuration on it, and no path
configuration on it). In addition working and protection circuits must be removed before an aps-
group-id may be removed.
Syntax:
port aps-group-id
Example: port aps-16
rates must be modified, the changes must be performed at the line
aps: keyword
group-id: 1 — 16
Interface Configuration
Page 279