Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 612

Tools Commands
lag
Syntax lag lag-id lag-id
Context tools>dump
Description
This command dumps LAG information.
Parameters
lag-id — Specifies the LAG ID.
map-to-phy-port
Syntax map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid
isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]
Context tools>dump
Description This command provides the ability to respond to a query to provide the link in a LAG/Ethernet
tunnel (loadsharing protection mode)/CCAG that is currently assigned to a given service-id or ISID.
Parameters
lag-id — Specifies the LAG ID.
isid — Specifies the ISID.
service-id — Specifies the service ID.
tunnel-index — Specifies the tunnel index.
ccag-id — Specifies the CCAG ID.
Page 612
Link protocol state
Diff delay state
Smoothed diff delay
Historical RTT
Rx LinkId
LIP CTL Messages
Hello Messages
Hello Ack Messages
AddLink Messages
AddLinkAck Messages
AddLinkRej Messages
Values
1..200
Values
1..200
Values
0..16777215
Values
1..2147483648, 64 char max
Values
1..1024
Values
1..8
: Up
: OK
: 0 ms.
: 2248, 2242, 2309 us.
: "1/1/1.1.4.1"
: Tx: 14 Rx: 13
: Tx: 8 Rx: 1
: Tx: 1 Rx: 8
: Tx: 3 Rx: 1
: Tx: 1 Rx: 2
: Tx: 0 Rx: 0
7750 SR OS Interface Configuration Guide