Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 591

7750 SR OS Interface Configuration Guide
Label
System ID
Admin Key
Oper Key
System Priority
Prtr System ID
Prtr Oper Key
Prtr System Pri-
ority
Mode
Opr
Port Threshold
Thres. Exceeded
Cnt
Threshold Action
Encap Type
Lag-IFIndex
Adapt QoS
Port ID
(LACP) Mode
LACP xmit
standby
Slave-to-partner
Port-id
Adm
Active/stdby
Opr
Primary
Sub-group
Description (Continued)
System ID used by actor in LACP messages.
Configured LAG key.
Key used by actor in LACP messages.
System priority used by actor in LACP messages.
System ID used by partner in LACP messages.
Key used by partner in LACP messages.
System priority used by partner in LACP messages.
LAG in access or network mode.
Up — The LAG is operationally up.
Down — The LAG is operationally down.
Configured port threshold.
The number of times that the drop count was reached.
Action to take when the number of available links is equal or below the
port threshold.
The encapsulation method used to distinguish customer traffic on a
LAG.
A box-wide unique number assigned to this interface.
Displays the configured QoS mode.
The specific slot/MDA/port ID.
LACP active or passive mode.
LACP transmits on standby links enabled / disabled.
Configured enabled/disabled.
Displays the member port ID.
Displays the member port administrative state.
Indicates that the member port is selected as the active or standby link.
Indicates that the member port operational state.
Indicates that the member port is the primary port of the LAG.
Displays the member subgroup where the member port belongs to.
Interface Configuration
Page 591