Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 511

7750 SR OS Interface Configuration Guide
Label
Net. Egr. Queue
Pol
Encap Type
Active Alarms
Auto-negotiate
Alarm State
Collect Stats
Egress Rate
Egress Buf (Acc)
Egress Buf (Net)
Egress Pool Size
Ingress Buf
(Acc)
Ingress Pool
Size
OTU
Configured
Address
Hardware Address
Description (Continued)
Specifies the network egress queue policy or that the default policy is
used.
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
The maximum amount of egress bandwidth (in kilobits per second)
that this Ethernet interface can generate.
The access-buffer policy for the egress buffer.
The network-buffer policy for the egress buffer.
The amount of egress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port or channel for
egress buffering.
The access-buffer policy for the ingress buffer.
The amount of ingress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port or channel for
ingress buffering.
OTU encapsulation status.
The base chassis Ethernet MAC address.
The interface's hardware or system assigned MAC address at its
protocol sub-layer.
Interface Configuration
Page 511