Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 515

7750 sr series
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

7750 SR OS Interface Configuration Guide
Label
Unknown Proto
Discards Input/
Output
Errors
Sync. Status Msg
Tx DUS/DNU
Rx Quality Level
Tx Quality Level
SSM Code Type
Description (Continued)
For packet-oriented interfaces, the number of packets received through
the interface which were discarded because of an unknown or unsup-
ported protocol. For character-oriented or fixed-length interfaces that
support protocol multiplexing the number of transmission units
received via the interface which were discarded because of an
unknown or unsupported protocol. For any interface that does not sup-
port protocol multiplexing, this counter will always be 0. For ATM,
this field displays cells discarded on an invalid vpi/vci. Unknown proto
discards do not show up in the packet counts.
This field displays the number of cells discarded due to uncorrectable
HEC errors. Errors do not show up in the raw cell counts.
Whether synchronization status messages are enabled or disabled.
Whether the QL value is forcibly set to QL-DUS/QL-DNU.
Indicates which QL value has been received from the interface.
Indicates which QL value is being transmitted out of the interface.
Indicates the SSM code type in use on the port.
Interface Configuration
Page 515

Advertisement

Table of Contents
loading

Table of Contents