Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 348

Configuration Commands
Description This command configures the time interval between keep-alive PDUs.
Default
no keep-alive
Parameters
timer — Specifies the time interval, in seconds, between keep-alive PDUs.
retry-timeout
Syntax retry-timeout timer
no retry-timeout
Context config>port>ethernet>dwl
Description This command configures the minimum wait time before re-enabling port after loop detection.
Default no retry-timeout
Parameters
timer — Specifies the minimum wait time before re-enabling port after loop detection.
use-broadcast-address
Syntax [no] use-broadcast-address
Context config>port>ethernet>dwl
Description
This command specifies whether or not the down when looped destination MAC address is the
broadcast address, or the local port MAC address, as specified in the port's MAC address.
Page 348
Values
1 — 120
Values
0, 10 — 160
7750 SR OS Interface Configuration Guide